[Close] 

Painter/Blaster Helper 2 - 3

Job Overview:
Paint walls, equipment, buildings, bridges, and other structural surfaces, using brushes, rollers, and spray guns. May remove old paint to prepare surface prior to painting. May mix colors or oils to obtain desired color or consistency.
Key Responsibilities/Accountabilities:
Cover surfaces with drop cloths or masking tape and paper to protect surfaces during painting.
Selects and mixes coating additives to thin or promote drying and adhesion.
Fill cracks, holes, and joints with caulk, putty, plaster, or other fillers, using caulking guns or putty knives.
Uses high air-pressure sandblasting equipment, chemical application, chipping hammer, power tools and other abrasives to remove rust, grease, dirt, concrete, and old paint prior to paint application.
Apply primers or sealers to prepare surfaces, such as bare wood, metal, piping, fixtures, structures and equipment for finish coats.
Selects paint according to company color scheme and specifications.
Apply paint, stain, varnish, enamel, and other finishes to heavy equipment, buildings, bridges, and/or other structures, using brushes, spray guns, sandblasting equipment, or rollers. May use epoxy, latex or enamel coatings.
Calculate amounts of required materials and estimate costs, based on surface measurements and/or work orders.
Read work orders or receive instructions from supervisors or homeowners in order to determine work requirements.
Disassemble paint and sandblasting equipment and cleans equipment, using solvent, wire brushes, and dry cloth.
Erect scaffolding and swing gates, or set up ladders, to work above ground level.
Remove fixtures such as pictures, door knobs, lamps, and electric switch covers prior to painting.
Wash and treat surfaces with oil, turpentine, mildew remover, or other preparations, and sand rough spots to ensure that finishes will adhere properly.
Mix and match colors of paint, stain, or varnish with oil and thinning and drying additives in order to obtain desired colors and consistencies. Respiratory protection is common and required in many applications.
Responsible for observing and complying with all safety and project rules.
Performs other duties as required.
Basic Qualifications:
12-18 months of documented field experience in chosen craft discipline.
Able to perform some support tasks with close supervision/direction and support.
Must have the ability to read and interpret instructions and documentation.
The degree of job responsibilities and requirements may vary depending on months of experience.
Desired/Preferred Qualifications:
Has knowledge of application techniques.
Work within precise limits or standards of accuracy.
Apply shop mathematics to solve problems.
Plan work and select proper tools.
Compare and see differences in the size, shape and form of lines, figures and objects.
Visualize objects in three dimensions from plans and drawings.
Make decisions based on measurable criteria.
Work at heights without fear.
Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
Relies on instructions and pre-established guidelines to perform the functions of the job.
Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager.
Other Details:
If applicable to the project, etc.
Physical Requirements:
NP=Not Present, O=Occasionally (0-33%), F=Frequently (34-66%), C=Constantly (67-100%)
Standing
C
Walking
O
Sitting
O
Pushing
NP
Pulling
NP
Climbing
F
Balancing
F
Bending
F
Stooping
F
Kneeling
O
Crouching
F
Crawling
O
Reaching
C
Handling
C
Fingering
C
Feeling
F
Vision
F
Hearing
F
Lifting (lbs)
Carrying (lbs)
0-10
F
0-10
F
10-25
F
10-25
F
25-50
F
25-50
F
McDermott is a premier, fully-integrated provider of technology, engineering and construction solutions to the energy industry. For more than a century, customers have trusted McDermott to design and build end-to-end infrastructure and technology solutions-from the wellhead to the storage tank-to transport and transform oil and gas into the products the world needs today.


Don't Be Fooled

The fraudster will send a check to the victim who has accepted a job. The check can be for multiple reasons such as signing bonus, supplies, etc. The victim will be instructed to deposit the check and use the money for any of these reasons and then instructed to send the remaining funds to the fraudster. The check will bounce and the victim is left responsible.

More Jobs

Painter/Blaster Journey 1 - 3
Hackberry, LA McDermott Corporation
Ironworker Helper 2
Westlake, LA McDermott
Painter/Blaster
Plaquemine, LA McDermott
Carpenter - Helper 2
Robert, LA Overland Contracting, Inc.
Painter/Blaster
New Orleans, LA Tradesmen International, Inc.